RICABOND PAVE “A high performance Terrazzo flooring and Tile Sealer with excellent durability and good gloss retention.” COMPOSITION RICABOND PAVE is a fully formulated interior and exterior penetrating sealer with sheen that is ready to use. FIELD OF APPLICATION RICABOND PAVE can be used in the following areas: DRIVEWAYS GARAGE FLOORS PATIOS FOR INTERIOR AND EXTERIOR FLOORS TERRAZZO, SANDSTONE AND SLATE   UNDERCOAT SEAL  – for vinyl tile floors prior to coating with strippable floor polish. Best results are obtained by diluting the product to 20% solids prior to application. CONCRETE SEAL – on new or aged concrete to prevent dust and oil penetration. TERRAZZO SEAL – apply first coat to key into the Terrazzo followed by one or two top coats depending on sheen levels. PROPERTIES  Appearance                   :    Thin white emulsion.  Specific gravity              :    1.02  g/cm3 @ 25°C.  pH neat Solution            :    8.5 – 9.5  Viscosity                         :    10 cps  Solids                             :    24% BENEFITS  Durable.  Resistant to detergents  Gives heavy duty protection against oil and water based stains.  Amine resistant.  Gives from low sheen to high gloss finish depending on the number of coats applied.  Resists UV light degredation. STORAGE CONDITIONS Ensure that drums are kept sealed when the product is not in use.  Protect from exposure to frost. Product has a shelf life of at least 12 months if handled and stored correctly.   SAFE HANDLING PRACTICES When working with chemicals, protective clothing should be worn at all times.  This equipment should include impervious gloves, goggles and protective clothing.  For detailed health and safety information, refer to the relevant MSDS Bulletin. ATTENTION The data contained in this technical bulletin is based on extensive laboratory studies and field applications through bulk trials.  Since there are many factors that may influence processing and application, the information herein does not exempt the user from performing their own tests and experiments to determine the suitability of the product for their own application. The information contained does not provide any liability or legally binding guarantee regarding the suitability and properties of the product for a specific end use.  It is the obligation of the user to ensure those proprietary rights; laws and legislation are observed.